loadoreo.blogg.se - Readme.compilation ntopng

#README.COMPILATION NTOPNG HOW TO#

All pins are 3.3V, output current is 5mA.

When the external device’s power is greater than the MicroUSB's the external device is charging the board otherwise the board powers the external device.

optimized OpenMediaVault configuration optionsĤ Diagram, Layout and Dimension 4.1 Layout.

relieves overheat compared to kernel Linux-3.4.

supports dynamic frequency scaling and voltage regulation.

supports audio recording and playing with 3.5mm audio jack.

supports USB WiFi module: refer to #Connect USB WiFi to NEO.

supports FriendlyElec's NanoHat-PCM5102A.

supports file system auto check and repair on system boot.

on first system boot file system will be automatically extended.auto-login with user account "pi" with access to npi-config.welcome window with basic system information and status.software utility: RPi.GPIO_NP to access GPIO pins.software utility: wiringNP to access GPIO pins.npi-config: system configuration utility for setting passwords, language, timezone, hostname, SSH and auto-login,and enabling/disabling i2c, spi, serial and PWM.rpi-monitor: check system status and information.OS/Software: u-boot, UbuntuCore and Android.Audio input/output Port: 5Pin, 2.0mm pitch pin header.Debug Serial Port: 4Pin, 2.54 mm pitch pin header.CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz.The NanoPi NEO(abbreviated as NEO) is another fun board developed by FriendlyARM for makers, hobbyists and fans.16 Hardware Differences Among Different Versions.13.8 Connect Matrix - 2'8 SPI Key TFT to NanoPi NEO.

13.5 Connect Arduino Compatible UNO Dock to NEO.13.3 Connect Python Programmable NanoHat Motor to NEO.13.2 Connect Python Programmable NanoHat OLED to NEO.

13.1 DIY NAS Server with 1-bay NAS Dock & NEO.

7.5 Check Network->Interfaces Configurations.

#README.COMPILATION NTOPNG HOW TO#

6.17 How to install and use docker (for armhf system).